Mielke's
Fiber Arts, LLC Your Central Wisconsin source for weaving,
spinning, knitting, crocheting, tatting, bobbin lace, felting, dyeing, and
locker hooking equipment, books, and supplies.
6 x 9 x 1 1/2 inches, this firm
charcoal grey
foam pad is a
perfect working surface for needle felting. Protect your table and protect
your needles. Can also be used as a form for needlefelting purses and
bags...$4.50 #479022
9 x 12 x 1 1/2 inches, firm charcoal grey
foam pad is a
perfect working surface for needle felting. Protect your table and protect
your needles. Can also be used as a form for needlefelting purses and
bags...$7.95 #479018
At 10 x 15 x 2 inches, the
large rectangular form is excellent for making scarves, stoles, bags and purses
(see pictured below, under "a")...$15.00 #439011
Here are some
ideas! Purses and bags made on the foam forms. a. Made on large rectangular form
b. Made on large rectangular form cut in half.
c. Made on hat form.
d. Made on brim form.
Suzanne
Higgs Needle Felted Purse and Bag Directions...$5.00 #439012
Foam
Rubber Hat Forms Needle
felting hat forms - needle felt around the form to create a unique, wooly hat!
One edge is sharp, for a hat with a distinct top edge, or use the buffed edge
for a hat with a more rounded top. Now available in a multi-height style
- the 4" height (works
well with the brim, see below) becomes the 5" height (perfect for
toques and rolled brims) by using the form with the height extender that comes
with each form - simply attach the extender to the crown with a felting needle
or T-tack. By felting around the only the edge of the crown, you can also
make earwarmers. This foam is made in part with soybean oil. Designed by Suzanne Higgs.
If you are going to use alpaca or llama fibers, please use small form for best results.
Small form is for heads measuring 20-21 inches.
Medium form is for heads measuring 21-22 and a half inches.
Large form is for heads measuring 22-23.5 inches.
With normal use, each form will last for 10+ hats.
Super
Big Hat Form
This form is designed for the needle felter/hat maker who is interested in going beyond needle felting with the hat forms. The much larger form allows for
extensive wet felting to occur after the needle felting is completed.
During the wet felting one is able to create unique folds and turns into the finished felt.
It is for using very fine fibers only, as they shrink well during the wet
felting. Merino, Merino/Silk, Merino/Tencel, Cormo, and Icelandic fiber
have worked well with this form, but don’t be afraid to try your own fibers. The results using merino can be seen
below. This form also works very well for felt vessels or felt bags using many different fibers. Let the fun begin!
The
hat
is begun on the super big hat form with dry needle felting. Then the needled
fabric is placed over an inflatable ball and wet felted to finish.
Form measures 10" diameter, 11" tall.
Optional accessories:
Examples of hats made on the
needle-to-wet felting forms.
Clover Needle Felting Appliqué Molds
The Needle Felting Appliqué Molds can be used directly onto your project or
worked onto the mat to be joined for 3-dimensional design and appliqué.
Available in 8 designs. Designed to be used with the Clover
Needle Felting Mat and Needle
Felting Pen Tool.
Clover Brush Mat
A sturdy, permanent brush-style mat used as a platform for needle
felting. Designed for use with the Clover
Felting Tool (see above). Available in two sizes:
Small Brush Mat, 2.7" x 3.5"
Large Brush Mat, 3.25" x 5"
Clover Needle Felting Claw and Mat Cleaner
Three in one assisting tool! This new tool provides protection from injury by
securing the materials as the felting process takes place. The Claw helps keep
small pieces in place while felting and it also acts as a blending tool for
mixing wool roving colors. The Mat Cleaner works as a brush to remove wool from
the Felting Needle
Mat.
Mielke's
Fiber Arts, LLC
